Top 16 Reasons to Get XTOOL Anyscan A30 ALL System
1. Ability to quickly Read and Clear codes in ALL modules for European, Asian, and Domestic vehicles 1996 present
2. One button Auto-Scan reads codes in ALL modules and displays them on the Phone
3. Quick Erase feature allows all codes to be cleared with the push of a button
4. Live data graphing for the ECU
5. One tool to do it all. Reads and clears trouble codes on engine, transmission, airbag, and ABS failures
6. Global OBD II coverage (US, Asian, & European)
7. Turns off engine, transmission, ABS, and airbag warning lights for most USA Domestic, Asian, and European vehicles
8. Supports all 10 test modes of the latest J1979 OBD II test specs, including reading Codes, Erase codes, Live Data, Freeze Frame, I/M Readiness, O2 Monitor Test, On-Board Monitor Test, Component Test, and Vehicle Information
9. Enhanced OBD II Mode 6
10. OBD II code tips guide technicians to the root cause of trouble codes faster
11. Data graphing
12. View freeze frame data
13. USB cable included for product updates
14. FREE software updates and upgrades included
15. One (1) Year Warranty
16.Newest APP V1.3 Download
A30 Support multi-Language:
German, Spanish. French, Italian, English, Polish, Portuguese, Russian
(if you need to change language please provide the serial number on the A30, we will change the language for you in 24 hours )
Xtool Anyscan A30 5 Special Function:
1. EPB Reset: is important in the maintenance of the electronic braking system's safety and efficiency.
2.Throttle reset: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount ofair entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair
3.DPF Service: carry out numerous functions to the Diesel Particulate Filter system. The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
4.Steering Angle Sensor (SAS) Service: Performs calibration for the Steering Angle Sensor (SAS), which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared.
5.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
6.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
and more .....
Xtool Anyscan A30 Description:
1.Download the (Anyscan A30) app from Google play or App store
2.and active the app before you use it to test vehiles
3.Input activation code,product serial number (each device will have a serial number and activation code), user number ,email address ,call phone number and password ,the system will then save it .
Activation is a one time process. Th Anyscan A30 application will start after actiivation
Select the Language .Please tick the required option from the multi-language
Europe
For Audi, For Skoda, For EurFORD, For Opel, For Bugatti BenzTRANSP, For Lamborghini, For Bentley, For SEAT, For MINI, For ROLLS, For For BMW , For SMART, For VAUXHALL, For PORSCHE For JAGUAR, For Volkswagen Nutzfahrzeuge, For MAYBACH, For LANDROVER, For BENZ, For DACIA, For CITROEN, For RENAULT, For VOLVO, For PEUGEOT, For VW
America
For GMC, For CADILLAC, For CHEVROLET, For BUICK, For PONTIAC, For SATURN, For HUMMER, For DODGE, For USAFORD, For CHRYSLER, For GM
CHINA
For SAIC-MG, For GREAT WALL, For BYD
ASIA
For KIA, For INFINTI, For DAIHATSU, For ISUZU, For SSANGYOUNG, For SUZUKI, For HYUNDAI, For MAZDA, For ACURA, For HONDA, For SUBARU, For LEXUS, For NISSAN, For SCION, For TOYOTA, For MITSUBISHI
AUSTRALIA
For AUSFORD, For HOLDEN
I have recently purchased the XTOOL Anyscan A30 Code Reader for my Mercedes-Benz C250. I want to install the turbo but before that, I need to make sure everything about my car works a hundred percent well. No check engine lights, no faults, no issues. I'm so happy with this unit bought from xtool.co.uk.
See what I have got from the product package:
Anyscan A30 unit, extension cable, Certificate of Quality (Activation Code contained), Instruction Manual.
Let's get started to the quick scan test.
Step-by-step guide:
Download the (Anyscan A30) APP from Google play or App store
Activate the APP with the activation code and product serial number
Then, we have to plug the Anyscan code reader into the car’s OBD port. (You can use the extension cable depending on personal needs or habit)
Already connect the code reader to my iPad and the APP is activated that can be normally used.
Choose the vehicle model(Depending on your car manufacturer):
Select “Europe”>>”BENZ”>>”C-Class/CLK/CLA”>>”C-Class”>>”204”>>”Gasoline”
Then, we enter into the “Information” interface.
Two options for us to choose: Quick Test or Control Unit.
Here, let’s choose “Quick Test” to begin the scan process.
The code reader will automatically begin the scanning process until the jog is done.
Whether the modules of the car have any fault code or not will be directly displayed on the screen.
As for my Mercedes-Benz, here are 67 different modules being scanning, it would take a few minutes. So no choice but to wait.
Now, the scan is completed.
It says there is a fault with the ignition switch so let’s get a look into that and then I have a few other fault sets it’s related to some of my LED bulbs which is a non-issue.
Click “number 7:EZS-Electronic ignition switch”>>”Diagnosis” on the bottom left
It will come to the “Read Trouble Code” interface.
It will tell you the specific explanation of the corresponding trouble code.
I did some quick research about the fault code and it looks like it’s really not an issue unless my ignition is at fault and it doesn’t work, but everything works fine.
So I’m gonna clean all the codes. Click “Clear All DTCs” to get it done.
Here is another important procedure you guys have to know.
You can enter into the “Control Unit” in the “Information” interface. Then, you can test like everything on the car.
Seven major control units of Drive, Chassis, Body, Information and communication, Seats and Doors, Air conditioning and Driver assistance system.
This is actually very easy-to-use and powerful code reader.
Remember one last thing we have to do after this scan test?
YES. Please remember to unplug the connector from car’s OBD port.
That’s all for today. Hope you guys like it and get one from the website of xtool.co.uk.