Product Description
XTool KS-2 smart key emulator for Mitsubishi systems All Keys Lost
works with X100 PAD3/X100 PAD3 SE/X100 PAD2 Pro/A80 Pro/A80/AutoProPAD
XTOOL KS-2 Mitsubishi Smart Key Simulator
The KS-2 is a smart key emulator for Mitsubishi systems. It can read and store the vehicle’s immobilizer data through any XTOOL programming device, then write it to the KS-2 and emulate a programmed master key. The emulated “key” will allow you to switch the ignition on, so you can perform active diagnostics. It will also allow you to program additional keys, as the emulated smart key serves as the master. This means the end-user need only purchase a single key for programming in the event of “All Keys Lost.”
Xtool KS-2 Features & functions:
- Support Mitsubishi 46-type smart key all-key-lost programming
- support key chip generation, copy, simulation functions
- The simulator can be reused
- After programming the key, remove the battery to restore the initial state.
- KS-2 smart key simulator needs to be used together with Xtool equipment
Works with the following:
X100 PAD3
X100 PAD3 SE
X100 PAD2
X100 PAD2 PRO
A80 Pro
A80
AutoProPAD
Xtool KS-2 Simulator Support List
Model |
Year Range |
Key Type |
Support |
Outlander |
2008- |
46 |
Yes |
ASX |
All |
46 |
Yes |
Lancer |
2008- |
46 |
Yes |
Delica |
All |
46 |
Yes |
Galant Fortis |
2008- |
46 |
Yes |
Mirage |
2012-2014 |
46 |
Yes |
RVR |
All |
46 |
Yes |
Attrage |
2014 |
46 |
Yes |
Space Star |
2013-2014 |
46 |
Yes |
KS-2 Speciafications
Parameter |
Index |
Battery |
CR2025 3V 165mAh |
Standby current |
Standby current≤2μA |
Reading and writing frequency |
125kHz |
Status indicator light |
1pc (Mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) |
Update |
Turn on for 2s and then turn off ;When comunicating, it is flashing 0.5s/time; |
Working temperature |
-20℃~60℃ |
Storage temperature |
-20℃~70℃ |
Structure size |
66mm*40mm*12mm |
Package includes:
1pc x XTOOL KS-2 Mitsubishi Smart Key Simulator Support List